Industry insights6 min read

Pearson vs. Spearman: Which Correlation Fits Your Process Data?

Learn what each correlation method reveals about sensor data, why their results can differ, and how comparing both can help you investigate a process question.

Key takeaways

  • Pearson (r) measures how closely two signals follow a straight line, using the measured values.
  • Spearman (ρ) measures a consistent rise or fall, including a curve, using ranks rather than the raw values.
  • Both run from −1 to +1. Neither one tells you the engineering rate of change, such as kilowatts per extra unit of flow.
  • A gap between the two results can point to a nonlinear pattern that one method summarizes and the other does not.
  • Compare both on the same observations, then check whether the explanation fits the process, before trusting either coefficient.
In this article

You are reviewing a process trend before a meeting. Feed flow has changed, pump power looks different, and you want to know whether the two are moving together. You export the data, run a correlation, and get a number. But how much does that number tell you?

The answer depends partly on the method. Pearson and Spearman both measure association between variables, but they capture different features of that relationship. A straight-line pattern and a curved, consistently increasing pattern can produce different results.

For an engineer testing a hunch, comparing the two is a useful starting point. The next step is understanding why they agree or disagree, and whether that explanation makes sense for the process.

What do Pearson and Spearman actually measure?

Pearson correlation, usually written as r, measures the strength and direction of a linear relationship using the measured values. It asks how closely the observations follow a straight-line pattern. [1]

Spearman correlation, often written as ρ, measures a monotonic relationship using ranks. Monotonic means that as one variable increases, the other tends to move consistently upward or consistently downward, even if the pattern curves. [2, 3]

Both coefficients range from −1 to +1. The sign indicates direction; the magnitude indicates strength for the type of relationship being measured. Neither coefficient tells you the engineering rate of change, such as how many kilowatts accompany an additional unit of flow.

What do Pearson and Spearman actually measure?
QuestionPearsonSpearman
What does it summarize?PearsonA linear relationshipSpearmanA monotonic relationship
What does it use?PearsonMeasured valuesSpearmanRelative ranks
Where is it useful?PearsonApproximately straight-line patternsSpearmanConsistently rising or falling patterns, including curves
How do extreme readings affect it?PearsonTheir magnitude can strongly influence the resultSpearmanTheir magnitude has less influence after ranking, but bad observations still matter
What can a low score miss?PearsonNonlinear relationshipsSpearmanRelationships that reverse direction, such as U-shaped patterns
Pearson summarizes a straight-line pattern. Spearman summarizes a consistent rise or fall, including curves.

Calculating Pearson’s coefficient does not require normally distributed data. Distributional assumptions become relevant when interpreting conventional significance tests and confidence intervals. Choosing a method solely because a sensor’s histogram looks normal can miss the more useful question: what does the relationship between the two variables look like? [1]

When does each method help with a plant-data question?

Consider two illustrative situations. These are examples of interpretation, not measured results from a customer dataset.

First, suppose feed flow and pump power form an approximately straight band on a scatter plot during a stable operating window. Pearson is a natural way to summarize that linear association. Spearman may also be strong because the observations keep a similar ordering.

The operating window matters. Do not assume that flow and power are proportional across every pump condition. A change in speed, head, fluid properties, or efficiency can change the pattern. Start with what the selected observations show and check it against the equipment’s behavior.

Now imagine a temperature–viscosity dataset whose scatter plot falls steeply at first and then flattens. If higher temperatures consistently correspond to lower viscosity, Spearman can capture that ordering even though the relationship is curved. Pearson may also show a negative association, but it summarizes the linear component.

Neither method replaces the plot. A scatter plot helps reveal curves, clusters, unusual readings, and changing spread that one coefficient cannot describe. [4]

What can a difference between the results tell you?

A gap between Pearson and Spearman is a reason to inspect the data more closely. It does not establish that a relationship is real, identify its cause, or automatically make one method correct.

Compare the absolute magnitudes when discussing strength, and keep the signs visible. A negative coefficient close to −1 represents a stronger negative association than one close to zero; simply asking which number is larger would be misleading.

If Spearman is much stronger in magnitude, inspect the plot for a consistent curve and check whether a few extreme readings are influencing Pearson. If Pearson is stronger, investigate whether a small number of high-leverage observations are driving the linear result. These are possibilities to examine, not diagnoses based on the gap alone.

If both are weak, look for patterns that neither summarizes well. A U-shaped response, separate operating clusters, or a delayed response may still deserve investigation. If both are strong, ask whether the apparent connection survives a change of time window or operating condition.

The useful question is: what feature of the data explains these results?

Check the process context before trusting the coefficient

Before comparing the methods, prepare the same paired observations for both. Align timestamps, confirm units, and document missing-value handling. Otherwise, you may be comparing results from different subsets of the export. [3]

Choose an operating window that matches the question. For example, an investigation into steady production should not accidentally become a comparison between shutdown and full-load operation. Review startup periods and grade changes separately when they represent different conditions.

Check timing, too. In an illustrative heat-exchanger investigation, an inlet change may precede an outlet response. Pairing only simultaneous readings could miss that sequence. Consider physically plausible delays rather than shifting timestamps until a stronger score appears. Time-series models explicitly allow for lagged effects and dependence between successive observations. [5]

Finally, keep association separate from causation. Two variables may respond to the same load change or control action. A strong coefficient can help prioritize a hypothesis, but establishing a mechanism requires process knowledge and further evidence. [4]

Record the variables, time window, exclusions, and methods so a colleague can understand exactly what you compared.

Compare both methods with Grayson TimeSeries

Grayson TimeSeries supports Pearson and Spearman correlation inside Microsoft Teams. Engineers can bring an Excel or CSV process-data export into the conversation and use it to investigate a specific question, alongside the historian and dashboards they already use. [6]

A starting request could be:

Compare Pearson and Spearman correlation between feed flow and pump power for this prepared steady-operation dataset.

Review the two coefficients alongside the data and operating context. If they differ, use that difference to decide what to examine next: a curve, an unusual reading, a change in operating conditions, or a timing effect.

The goal is to make the first investigation easier and more useful. You still need a clear question, appropriate data, and an engineering interpretation of the result.

Start with one pair of variables you suspect are connected. Run both methods on the same observations, inspect the pattern, and decide what evidence would help test your explanation.

Explore Grayson TimeSeries and see where it fits into your existing process-data workflow.

Sources

  1. SciPy: Pearson correlation — coefficient definition and the distinction between calculation and inference.
  2. SciPy: Spearman correlation — monotonic association and coefficient interpretation.
  3. R: Correlation, variance and covariance — rank calculation, robustness, and missing-value handling.
  4. NIST: Scatter plot — graphical diagnosis and the limits of causal interpretation.
  5. Forecasting: Principles and Practice — Dynamic regression models — time dependence and lagged predictors.
  6. The last mile of industrial data analysis — how an export-based investigation sits alongside the historian and dashboards already in place.

Next step

Try Grayson free, or keep reading

Ask your process data a question today.

Free. No credit card. Set up in under two minutes.

Use Grayson Free